Yukon 4WD V8-6.5L DSL Turbo VIN S (1997)
EGR Control Solenoid: Service and Repair
EGR Solenoid Replacement
EGR Solenoid
Removal Procedure
1. Remove the negative battery cables.
2. Remove the electrical connector from the solenoid.
3. Remove the vacuum hoses.
4. Remove EGR Solenoid mounting bolt (2).
5. Remove the EGR solenoid (1).
Installation Procedure
1. Install the EGR solenoid (1).
2. Install mounting bolt (2).
Tighten
^
Tighten mounting bolt to 6.0 Nm (53 lb in).
3. Install the vacuum hoses.
4. Install the electrical connector to the solenoid.
5. Install the negative battery cable(s).
