Yukon 4WD V8-6.5L DSL Turbo VIN S (1997)
NOTE: Check the image for special requirements and alignment adjustments. Check vehicle ride height. Verify alignment specifications before
proceeding.
7. Adjust caster and camber to the correct specifications by rotating the bolt head installed through adjuster cam.
8. Tighten the following:
a. Front upper control arm nuts (50) to 190 Nm (140 ft. lbs.).
b. Rear upper control arm nuts (50) to 190 Nm (140 ft. lbs.).
9. Set steering wheel on center, with wheels straight, and loosen adjuster sleeve nuts.
10. Adjust toe-in.
11. Tighten Tie rod adjuster sleeve nuts to 19 Nm (14 ft. lbs.).
12. Refer to steering linkage for proper position of clamps.
13. Recheck alignment specifications.
14. Lower the vehicle.
