Yukon Denali 2WD V8-6.0L Hybrid (2010)
Pedal Positioning Sensor: Service and Repair
Brake Pedal Position Sensor Replacement
Brake Pedal Position Sensor Replacement
Removal Procedure
1. Remove the driver knee bolster. Refer to Knee Bolster Replacement (Cadillac) (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Knee Bolster Replacement (Cadillac))Knee Bolster Replacement (Except Cadillac) (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Knee Bolster Replacement (Except Cadillac)).
2. Remove the fuse block cover.
3. Disconnect the brake pedal position sensor electrical connector (1).
4. Remove the brake pedal position sensor bolts (2).
5. Remove the brake pedal position sensor (3) from the vehicle.
Installation Procedure