Yukon Denali 2WD V8-6.0L Hybrid (2010)
2. If replacing the door handle, transfer the heated seat switch or seat adjuster memory switch, if equipped. Refer to Front Seat Heater Switch
Replacement (See: Seats/Seat Heater Switch/Service and Repair/Front Seat Heater Switch Replacement) or Driver Seat Adjuster Memory
Switch Replacement (See: Mirrors/Memory Positioning Systems/Seat Memory Switch/Service and Repair).
3. Depress both tabs to remove the front side door cable and pull the cable rearward out of the handle assembly.
Installation Procedure
1. Connect the front side door cable. Ensure the cable is fully seated past the guide tab.
2. Slide the front side door inside handle assembly into place (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the front side door inside handle fasteners and tighten to 2 Nm (18 lb in).
4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (See: Front Door Panel/Service and Repair).
