Yukon Denali 2WD V8-6.0L Hybrid (2010)
Rear Door Interior Handle: Service and Repair
Rear Side Door Inside Handle Replacement
Removal Procedure
1. Pull the door trim panel away from the door and support the bottom of the trim panel on the door panel hooks. Refer to Rear Side Door Trim Panel
Replacement (Standard Wheelbase) (See: Rear Door Panel/Service and Repair/Rear Side Door Trim Panel Replacement (Standard Wheelbase)
)Rear Side Door Trim Panel Replacement (Extended Wheelbase) (See: Rear Door Panel/Service and Repair/Rear Side Door Trim Panel
Replacement (Extended Wheelbase)).
2. Remove the rear side door inside handle fasteners (1).
3. Remove the rear side door inside handle fasteners assembly (2).
1. Disconnect the electrical connector.
2. Depress both tabs to remove the rear side door cable and pull the cable rearward out of the handle assembly.
