Yukon Denali 2WD V8-6.0L Hybrid (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the adjustable pedal position sensor bolts (1) and tighten to 2 Nm (18 lb in).
3. Connect the adjustable pedal position sensor jumper harness electrical connector (1).
4. Install the driver knee bolster. Refer to Knee Bolster Replacement (Cadillac) (See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Knee Bolster Replacement (Cadillac))Knee Bolster Replacement (Except Cadillac) (See: Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Knee Bolster Replacement (Except Cadillac)).
