Yukon Denali 2WD V8-6.0L Hybrid (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the brake caliper bracket mounting bolts and tighten to 200 Nm (148 lb ft).
4. Install the brake pad springs.
Note: Install the brake pads in the same location noted during removal.
5. Install the brake pads.
6. Install the brake caliper to the bracket. Refer to Front Brake Caliper Replacement (2500 Series) (See: Front Brake Caliper Replacement (2500
Series))Front Brake Caliper Replacement (1500 Series) (See: Front Brake Caliper Replacement (1500 Series)).
7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
8. Fill the master cylinder reservoir to the proper level with clean brake fluid, if necessary. Refer to Master Cylinder Reservoir Filling (See: Brake
Master Cylinder/Service and Repair/Procedures/Master Cylinder Reservoir Filling).
Front Brake Caliper Bracket Replacement (2500 Series)
Front Brake Caliper Bracket Replacement (2500 Series)
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
3. Remove the brake pads. Refer to Front Disc Brake Pads Replacement (1500 Series) (See: Disc Brake System/Brake Pad/Service and
Repair/Removal and Replacement/Front Disc Brake Pads Replacement (1500 Series))Front Disc Brake Pads Replacement (2500 Series) (See:
Disc Brake System/Brake Pad/Service and Repair/Removal and Replacement/Front Disc Brake Pads Replacement (2500 Series)).
4. Remove the brake pad retaining springs.
