Yukon Denali 2WD V8-6.0L Hybrid (2010)
Master Cylinder Reservoir Replacement (JH6)
Master Cylinder Reservoir Replacement (JH6)
Removal Procedure
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
Caution: Refer to Brake Fluid Effects on Paint and Electrical Components Caution (See: Service Precautions/Vehicle Damage Warnings/Brake
Fluid Effects on Paint and Electrical Components Caution).
1. Using a suitable tool, remove the brake fluid from the brake master cylinder reservoir.
2. Discard the brake fluid into an approved container.
3. Disconnect the brake fluid level indicator switch electrical connector.
4. Remove the master cylinder reservoir bolts (1).
