Yukon Denali 2WD V8-6.0L Hybrid (2010)
Parking Brake Cable: Removal and Replacement
Parking Brake Rear Cable Replacement - Left Side
Parking Brake Rear Cable Replacement - Left Side
Removal Procedure
1. Ensure the park brake is released.
2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling (See: Procedures/Parking Brake Cable
Adjuster Disabling).
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
4. Disconnect the left rear park brake cable (3) from the equalizer on the intermediate park brake cable (1).
5. Remove the park brake cable from the mounting bracket by depressing the locking tabs.
