Yukon Denali 2WD V8-6.0L Hybrid (2010)
Camshaft: Service and Repair
Camshaft Replacement
Camshaft Replacement
Special Tools
*
EN 46330 Timing Belt Tensioner Retaining Pin
*
J 42386-A Flywheel Holding Tool
*
J 45059 Angle Meter
Removal Procedure
Note: If camshaft replacement is required, the valve lifters must also be replaced.
1. Remove the radiator support. Refer to Radiator Support Replacement ().
2. Remove the valve lifters. Refer to Valve Lifter Replacement (See: Lifter / Lash Adjuster/Service and Repair/Valve Lifter Replacement).
3. Remove the engine front cover. Refer to Engine Front Cover Replacement (See: Timing Components/Timing Cover/Service and Repair).
4. Rotate the crankshaft sprocket until the camshaft position (CMP) actuator alignment mark (1) and the crankshaft sprocket alignment mark (2) are
aligned.