Yukon Denali 2WD V8-6.0L Hybrid (2010)
Camshaft: Service and Repair
Camshaft Position Actuator Replacement
Camshaft Position Actuator Replacement
Special Tools
*
EN 46330 Timing Belt Tensioner Retaining Pin
*
J 45059 Angle Meter
Removal Procedure
1. Remove the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (See: Engine Lubrication/Oil Pump/Service and
Repair).
2. Remove and discard the camshaft position (CMP) actuator solenoid valve (234).
