Yukon Denali 2WD V8-6.0L Hybrid (2010)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Oil Level Indicator Tube Replacement
Removal Procedure
1. Remove the oil level indicator (418).
2. Remove the wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Right Side (See: Body and Frame/Fender/Front Fender/Front
Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Right Side).
3. Remove the oil level indicator tube bolt (419).
4. Remove the oil level indicator tube (420) from the engine block.
Note: The O-ring seal may be reused if not cut or damaged.
5. Inspect the O-ring seal for cuts or damage.
6. Remove the O-ring seal (421) from the tube, if required.
Installation Procedure
