Yukon Denali 2WD V8-6.0L Hybrid (2010)
6. Pull back on the EOC pipe to disengage the pipe from the EOC pipe fitting.
7. Remove the DT-47731 or the J 28585 from the EOC pipe.
Installation Procedure
Note: Discard the EOC retaining clip and install a new retaining clip.
1. Install the EOC pipe into the EOC pipe fitting.
A distinct snap should be heard or felt when assembling the EOC pipe to the fitting.
2. To ensure the cooler line is properly installed, give the cooler pipe a gentle pull.