Yukon Denali 2WD V8-6.0L Hybrid (2010)
bolts, if equipped.
Tighten the bolts to 28 Nm (21 lb ft).
24. For Hybrid (HP2) vehicles, Install the steering gear motor shield.
25. For 1500 series vehicles, position the oil pan skid plate and install the oil pan skid plate bolts, if equipped.
Tighten the bolts to 28 Nm (21 lb ft).
26. Lower the vehicle.
27. Fill the engine with NEW engine oil. Refer to Fluid and Lubricant Recommendations (USA and Canada) (See: Maintenance) and Approximate
Fluid Capacities (See: Maintenance/Specifications).
28. Start the engine and inspect for leaks.
