Yukon Denali 2WD V8-6.0L Hybrid (2010)
1. Spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger will be inserted.
2. Install the exhaust system insulator (2 or 4) to the frame hanger, as required.
3. If the exhaust system insulator (2 or 4) was replaced, install the exhaust muffler assembly. Refer to Exhaust Muffler Replacement (With LC9,
LMG, LY5 or L76) (See: Muffler/Service and Repair)Exhaust Muffler Replacement (With L92) (See: Muffler/Service and Repair)Exhaust
Muffler Replacement (With LFA) (See: Muffler/Service and Repair)Exhaust Muffler Replacement (With LMG, LY2 or LY5) (See:
Muffler/Service and Repair).
4. Spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger will be inserted.
5. Install the exhaust system insulator (1 or 3), as required.
6. Lower the vehicle.
