Yukon Denali 2WD V8-6.0L Hybrid (2010)
4. Position the left front floor panel exhaust heat shield to the studs and install the heat shield nuts and tighten to 9 Nm (80 lb in).
5. Install the muffler assembly, as required. Refer to Exhaust Muffler Replacement (With LC9, LMG, LY5 or L76) (See: Muffler/Service and
Repair)Exhaust Muffler Replacement (With L92) (See: Muffler/Service and Repair)Exhaust Muffler Replacement (With LFA) (See:
Muffler/Service and Repair)Exhaust Muffler Replacement (With LMG, LY2 or LY5) (See: Muffler/Service and Repair).
6. Install the catalytic converter, if necessary. Refer to one of the following:
*
Catalytic Converter Replacement (with Exhaust Flange) (See: Catalytic Converter/Service and Repair/Catalytic Converter Replacement (with
Exhaust Flange))Catalytic Converter Replacement (with Exhaust Clamp) (See: Catalytic Converter/Service and Repair/Catalytic Converter
Replacement (with Exhaust Clamp))
*
Three-Way Catalytic Converter Replacement (See: Catalytic Converter/Service and Repair/Three-Way Catalytic Converter Replacement)
