Yukon Denali 2WD V8-6.0L Hybrid (2010)
6. Install the discharge hose (1) to the A/C compressor using new sealing washers. Refer to Air Conditioning System Seal Replacement (See:
Coupler HVAC/A/C Coupler O-ring/Service and Repair/Air Conditioning System Seal Replacement).
7. Install the discharge hose mounting bolt and tighten to 16 Nm (12 lb ft).
8. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (HP2) (See: Service and Repair/Refrigerant Recovery and
Recharging (HP2))Refrigerant Recovery and Recharging (Non-HP2) (See: Refrigerant/Service and Repair).
9. Leak test the fittings of the component using the J 39400-A.
Suction Hose Replacement (W/C69)
Suction Hose Replacement (W/C69)
