Yukon Denali 2WD V8-6.0L Hybrid (2010)
15. Install the HV dc battery cable (6) with seal (7) into the PIM distribution box.
16. Install the HV dc battery cable mounting fasteners (5). Tighten the mounting fastener to 9 Nm (80 lb in).
Caution: Always remove and install the High Voltage terminal fasteners with a magnet tipped socket. Never touch the exposed electronic circuit
board surface or components. Dropped fasteners or physical contact may result in electronic circuit board damage.
17. Install the high voltage (HV) dc battery cable terminal fasteners (2). Tighten the terminal fastener to 9 Nm (80 lb in).
18. Install the HV dc electric air conditioning compressor module (ACCM) cable (4) with seal (7) into the PIM distribution box.
19. Install the HV dc electric ACCM cable mounting fasteners (3). Tighten the mounting fasteners to 9 Nm (80 lb in).
Caution: Always remove and install the High Voltage terminal fasteners with a magnet tipped socket. Never touch the exposed electronic circuit
board surface or components. Dropped fasteners or physical contact may result in electronic circuit board damage.
20. Install the HV dc electric ACCM cable terminal fasteners (1). Tighten the terminal fastener to 9 Nm (80 lb in).
21. Install a new seal (3) on the PIM distribution box.
