Yukon Denali 2WD V8-6.0L Hybrid (2010)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement
Removal Procedure
1. Remove the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (See: Fuel Delivery and Air Induction/Fuel Pump/Service and
Repair).
2. Using a small pick like tool, push in the retainer (1) in order to disengage the electrical connector.
3. Remove the fuel level sensor electrical connector from the module cover.
4. Push the level sensor locking tangs (2) in towards the inside of the module bucket.
5. Slide the fuel level sensor up.