Yukon Denali 2WD V8-6.0L Hybrid (2010)
Tighten the clamp to 2.5 Nm (22 lb in).
*
Evaporative emission hose (9)
*
Fuel tank fill hose clamp (8)
Tighten the clamp to 2.5 Nm (22 lb in).
*
Fuel tank fill hose (7)
*
Fuel tank fill hose clamp (6)
Tighten the clamp to 2.5 Nm (22 lb in).
*
Fuel tank fill pipe clip (5)
*
Fuel tank fill hose (4)
*
Fuel tank fill pipe housing (3)
*
Fuel tank fill pipe housing bolts (2)
Tighten the bolts to 2.3 Nm (20 lb in).
*
Fuel tank filler vent hose (1)
Installation Procedure
1. Remove the caps from the fuel tank opening and the EVAP vent line.
2. Install the fuel fill hose to the fuel tank. Ensure that the notch in the hose is aligned with the notch on the fuel tank.
3. Install the fuel fill pipe vent hose to the fuel tank vent valve.
4. Install the tab (1) on the fuel fill pipe to the notch in the frame.
5. Install the fuel fill pipe bracket bolts (2, 4).
Tighten the bolt to 12 Nm (106 lb in).
6. Connect the fuel fill pipe vent line quick connect fitting (3) to the EVAP canister vent solenoid valve. Refer to Plastic Collar Quick Connect
Fitting Service (See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).