Yukon Denali 2WD V8-6.0L Hybrid (2010)
Throttle Body: Removal and Replacement
Throttle Body Assembly Replacement
Removal Procedure
Caution: Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic
throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control
components in cleaning solvents of any type.
Caution: DO NOT for any reason, insert a screwdriver or other small hand tools into the throttle body to hold open the throttle plate, as the
wedge inside the throttle body could be damaged.
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Air Cleaner Housing/Air Cleaner Fresh Air
Duct/Hose/Service and Repair).
2. Disconnect the engine wiring harness electrical connector (2) from the electronic throttle control.