Yukon Denali 2WD V8-6.0L Hybrid (2010)
1. Position the EBCM (1) to the BPMV.
2. Push the EBCM squarely onto the BPMV.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the EBCM bolts (1).
Tighten the bolts in an X pattern to 3 Nm (27 lb in).
4. Connect the EBCM electrical connector.
5. If installing a new EBCM, the EBCM must be programmed and the sensor and boost valve calibration and EBCM learn processes must be
performed. Refer to Control Module References (See: Testing and Inspection/Programming and Relearning).