Yukon Denali 2WD V8-6.0L Hybrid (2010)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor Replacement
Rear Wheel Speed Sensor Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Brakes and Traction Control/Service Precautions/Technician Safety Information/Brake Dust Warning)
.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Disconnect the wheel speed sensor electrical connector (1).
3. Release the wheel speed sensor electrical connector and sensor harness clips (2) from the inboard frame rail.
4. Remove the wheel speed sensor bolt (1).