Yukon Denali 2WD V8-6.0L Hybrid (2010)
Negative: Service and Repair
Engine Ground Strap Replacement
Engine Ground Strap Replacement
Removal Procedure
1. Remove the engine wiring harness ground bolt.
2. Reposition the engine wiring harness ground and ground strap.
3. Remove the ground strap nut from the stud at the front of dash.
4. Remove the ground strap from the stud.
Installation Procedure
1. Install the ground strap to the stud.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the ground strap nut to the stud at the front of dash and tighten to 9 Nm (80 lb in).
