Yukon Denali 2WD V8-6.0L Hybrid (2010)
7. Lower the vehicle enough to remove the right wheelhouse panel. Refer to Wheelhouse Panel Replacement - Right Side (HP2) (See: Body and
Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Wheelhouse Panel Replacement - Right Side (HP2)).
8. Working through the wheel opening, remove the positive battery cable clip (2) from the brake pipe.
9. Working through the wheel opening, remove the positive battery cable clip (3) from the air cleaner adapter bracket
10. Lower the vehicle.
11. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Service and Repair).
12. Remove the positive battery cable clip (4) from the air cleaner support bracket.
13. Remove the positive battery cable clip (5) from the fender inner panel.
14. Disconnect the positive battery cable electrical connector (1) from the drive motor generator control module.
15. Remove the positive battery cable (1) from the vehicle.
Installation Procedure
