Yukon Denali 2WD V8-6.0L Hybrid (2010)
Battery Current Sensor: Service and Repair
Battery Current Sensor Replacement
Removal Procedure
1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (See: Battery Cable/Negative/Service and Repair/Battery
Negative Cable Replacement).
2. Mark the location of the negative battery cable clip (1) and remove the clip from the cable.
3. Mark the location of the battery current sensor (2) on the battery cable with tape for reference during installation.
4. Remove the tape securing the battery current sensor to the negative battery cable.
5. Squeeze the negative battery cable branches together.
Note: Note the orientation of the battery current sensor prior to removal.
6. Slide the battery current sensor (2) off of the negative battery cable.
Installation Procedure