Yukon Denali 2WD V8-6.0L Hybrid (2010)
Fuse Block: Removal and Replacement
175 Amp Mega Fuse Replacement (with TP2)
175 Amp Mega Fuse Replacement (with TP2)
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
2. Remove the fuse cover.
3. Remove the starter solenoid cable nut (1) from the fuse stud.
4. Remove the starter solenoid cable terminal (2) from the fuse stud.
