Yukon Denali 2WD V8-6.0L Hybrid (2010)
13. Connect the engine wiring harness electrical connector (4) to the oil level sensor.
14. Install the transmission cover bolt.
Tighten the cover bolt to 9 Nm (80 lb in).
15. Install the oil pan skid plate if equipped, Refer to Oil Pan Skid Plate Replacement (2500/3500 with RPO NZZ) (See: Body and
Frame/Frame/Skid Plate/Service and Repair/Oil Pan Skid Plate Replacement (2500/3500 with RPO NZZ))Oil Pan Skid Plate Replacement (1500
with RPO NZZ) (See: Body and Frame/Frame/Skid Plate/Service and Repair/Oil Pan Skid Plate Replacement (1500 with RPO NZZ)).
16. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery Cable/Negative/Service
and Repair/Battery Negative Cable Disconnection and Connection).
