Yukon Denali 2WD V8-6.0L Hybrid (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the upper control arm bolts and tighten to 190 Nm (140 lb ft).
3. Connect the upper control arm to the steering knuckle.
4. Install the new nut to the upper ball joint stud and tighten to 50 Nm (39 lb ft).
5. Install the retaining bolts for the brake hose and wheel speed sensor brackets and tighten to 9 Nm (80 lb in).
6. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
7. Lower the vehicle.
8. Verify the wheel alignment. Refer to Wheel Alignment Specifications (See: Alignment/Specifications/Wheel Alignment Specifications).
Upper Control Arm Replacement (1500)
Upper Control Arm Replacement (1500)
