Yukon Denali 2WD V8-6.0L Hybrid (2010)
Shift Cable: Service and Repair
2ML70 - Automatic Transmission
Range Selector Lever Cable Replacement
Removal Procedure
1. Position the steering column shift lever to the park position.
2. Remove the instrument panel knee bolster. Refer to Knee Bolster Replacement (Cadillac) (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Knee Bolster Replacement (Cadillac))Knee Bolster Replacement (Except Cadillac) (See:
Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Knee Bolster Replacement (Except Cadillac)).
3. Remove the driver seat. Refer to Front Seat Replacement - Bucket (with HP2) (See: Body and Frame/Seats/Service and Repair/Front/Front Seat
Replacement - Bucket)Front Seat Replacement - Bucket (without HP2) (See: Body and Frame/Seats/Service and Repair/Front/Front Seat
Replacement - Bucket).
4. Remove the body hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Body Hinge Pillar Trim Panel Replacement).
5. Pull back the carpet and insulation around the driver area.
6. Remove the retainer securing the cable to the steering column.
