Yukon Denali 2WD V8-6.0L Hybrid (2010)
1. Install the shift lever (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the shift lever bolt (2) and tighten to 20 Nm (15 lb ft).
3. Connect all electrical connectors.
4. Position the shift lever seal.
5. Install the steering column shroud. Refer to Steering Column Shroud Replacement (Without Electronic Tilt Steering) (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Removal and Replacement/Steering Column Shroud Replacement (Without Electronic
Tilt Steering))Steering Column Shroud Replacement (With Electronic Tilt Steering) (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Removal and Replacement/Steering Column Shroud Replacement (With Electronic Tilt Steering)).
