Yukon Denali 2WD V8-6.0L Hybrid (2010)
10. Remove the manual shift detent spring bolt (4).
11. Remove the manual shift detent spring (5).
Note: Do not remove all the bolts in the control valve body assembly. Remove only the bolts indicated.
12. Remove the 4 control valve upper body bolts (4) M6 x 1.0 x 65.
13. Remove the 2 control valve upper body bolts (5) M6 x 1.0 x 80.
14. Remove the control (w/body and TCM) valve assembly (6).
15. Remove the automatic transmission (A/T) fluid pump seal assembly (7).
Discard the A/T fluid pump seal.
16. Remove the hybrid low, 1-2 clutch regulator valve seals (8).
Discard the clutch regulator valve seals.