Yukon Denali 2WD V8-6.0L Hybrid (2010)
7. Using the J 22912-B - remover and a hydraulic press, remove the inner drive pinion bearing.
Note: Insert the brass drift in the slots to remove the bearing cup and move the drift back and forth between one side of the cup and the other in
order to work the cups out of the retainer evenly.
8. Using a brass drift and a hammer, remove the outer pinion bearing cup.
Note: Insert the brass drift in the slots to remove the bearing cup and move the drift back and forth between one side of the cup and the other in
order to work the cups out of the retainer evenly.
9. Using a brass drift and a hammer, remove the inner pinion bearing cup.
10. Using a brass drift and a hammer, remove the pinion gear pilot bearing.
Installation Procedure