Yukon Denali 4WD V8-6.0L Hybrid (2011)
*
DO NOT use any air tools to remove or tighten the guide pin bolts. Use hand tools only.
*
Install an open end wrench to the guide pin and hold it in line with the caliper while removing or installing the caliper bolts. DO NOT allow
the wrench to come in contact with the brake caliper. Allowing the wrench to come in contact with the brake caliper will cause a pulsation
when the brake is applied.
10. Using an open end wrench to back up the caliper guide pin, remove the guide pin bolt.
11. Remove the brake caliper from the mounting bracket.
Installation Procedure
1. Install the brake caliper on to the mounting bracket.
