Yukon Denali 4WD V8-6.0L Hybrid (2011)
7. Remove the fan shroud bolts
8. Remove the upper fan shroud.
Installation Procedure
1. Install the upper fan shroud.
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
2. Install the fan shroud bolts.
Tighten the bolts to 9 Nm (80 lb in).
3. Install the fan shroud retainers.
4. If equipped install the inlet radiator hose retainer to the fan shroud
5. If equipped install the throttle body heater hose retainer to the fan shroud.
