Yukon Denali 4WD V8-6.0L Hybrid (2011)
5. Install the starter solenoid cable terminal (2) to the fuse stud.
6. Install the starter solenoid cable nut (1) to the fuse stud.
Tighten the nut to 15 Nm (11 lb ft).
7. Install the fuse cover.
8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection.
200 Amp Mega Fuse and Auxiliary Electrical Center 12VDC Junction Block Replacement
200 Amp Mega Fuse and Auxiliary Electrical Center 12VDC Junction Block Replacement