Yukon Denali 4WD V8-6.0L Hybrid (2011)
4. Install the coolant air bleed covers (313) and seals (308), if required.
5. If required, install the coolant air bleed cover bolts (312) 12 Nm (106 lb in).
6. Install the radiator vent inlet hose (2) to the coolant air bleed pipe fitting.
7. Position the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
8. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement See: Filters/Air Cleaner Housing/Air Cleaner Fresh
Air Duct/Hose/Service and Repair.
9. Fill the cooling system. Refer to Cooling System Draining and Filling See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair/Cooling System Draining and Filling.
10. If the rear coolant air bleed covers were replaced, install the intake manifold. Refer to Intake Manifold Replacement See: Engine, Cooling and
Exhaust/Engine/Intake Manifold/Service and Repair/Intake Manifold Replacement.
