Yukon Denali 4WD V8-6.0L Hybrid (2011)
7. Tighten the fuel fill hose clamp (1).
Tighten the clamp to 2.5 Nm (22 lb in).
8. Tighten the fuel fill pipe vent hose clamp (2) at the fuel tank vent valve.
Tighten the clamp to 2.5 Nm (22 lb in).
9. Position the fill pipe ground strap (5) to the left rear lamp ground wire (4).
10. Install the rear lamp ground wire (4) and ground strap (5) to the frame. Insert the lamp ground wire anti-rotation tab into the hole in the frame.
11. Install the chassis wiring harness ground bolt.
Tighten the bolt to 9 Nm (80 lb in).
