Yukon Denali 4WD V8-6.0L Hybrid (2011)
Tighten the bolts to 50 Nm (37 lb ft).
10. Install the right wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Right Side See: Body and Frame/Fender/Front Fender/Front
Fender Liner/Service and Repair/Front Wheelhouse Liner Replacement - Right Side.
11. Position the generator control module 3 phase cables to the bracket channel.
12. Install the generator control module 3 phase cable clip to the tab (3) on the engine bracket (2).
13. Install the generator control module 3 phase cable clip nut (1).
Tighten the nut to 9 Nm (80 lb in).
14. Install the drive motor generator power inverter module cover (2).
15. Tighten the drive motor generator power inverter module cover bolt (1).
Tighten the bolt to 1.5 Nm (13 lb in).
16. Connect the engine wiring harness electrical connector (3) to the drive motor generator power inverter module cover.
