Yukon Denali 4WD V8-6.0L Hybrid (2011)
Pedal Positioning Sensor: Service and Repair
Brake and Accelerator Pedal Adjuster Position Sensor Replacement
Brake and Accelerator Pedal Adjuster Position Sensor Replacement
Removal Procedure
1. Turn the ignition switch to the OFF position.
2. Remove the driver knee bolster. Refer to Knee Bolster Replacement .
3. Disconnect the adjustable pedal position sensor jumper harness electrical connector (1).
4. Remove the adjustable pedal position sensor bolts (1).
