Yukon Denali 4WD V8-6.0L Hybrid (2011)
1. Position the generator bracket to the engine.
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
2. Install the generator bracket bolts.
Tighten the bolts to 50 Nm (37 lb ft).
3. Position the engine wiring harness clip (1) to the generator bracket and install the engine harness clip bolt (3).
Tighten the bolt to 9 Nm (80 lb in).
4. Install the power steering pump. Refer to Power Steering Pump Replacement See: Steering and Suspension/Steering/Power Steering/Power
Steering Pump/Service and Repair/Power Steering Pump Replacement.
5. Install the generator. Refer to Generator Replacement See: Generator Replacement.