Yukon Denali 4WD V8-6.0L Hybrid (2011)
Power Steering Fluid Cooler: Service and Repair
Power Steering Fluid Cooler Replacement
Removal Procedure
1. Remove the fascia grille. Refer to Fascia Grille Replacement .
2. Remove the radiator grille reinforcement support, if equipped. Refer to Radiator Grille Reinforcement Support Replacement See: Body and
Frame/Radiator Support/Service and Repair/Radiator Grille Reinforcement Support Replacement.
3. Remove as much power steering fluid from the power steering fluid reservoir as possible.
4. Place drain pans under the vehicle as needed.
Caution: Refer to Power Steering Hose Disconnected Caution See: Power Steering Line/Hose/Service Precautions.
5. Disconnect the power steering fluid cooler hose (3) from the steering gear (2).
6. Disconnect the power steering fluid cooler hose (4) from the power steering pump (1).
7. Remove the power steering fluid cooler bolts (2).
8. Remove the power steering fluid cooler (1) from the vehicle.
Installation Procedure
1. Install the power steering fluid cooler (1) to the vehicle.
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
2. Install the power steering fluid cooler bolts (2).