Yukon Denali 4WD V8-6.0L Hybrid (2011)
8. Install the shock absorber. Refer to Shock Absorber Replacement See: Suspension Strut / Shock Absorber/Service and Repair/Front
Suspension/Shock Absorber Replacement.
9. Install the torsion bars. Refer to Torsion Bar and Support Assembly Replacement See: Torsion Bar/Service and Repair.
10. Remove the support for the knuckle and upper control arm.
11. Install the stabilizer shaft link to the lower control arm. Refer to Stabilizer Shaft Replacement .
12. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation See: Wheels and Tires/Service and Repair.
13. Remove the supports and lower the vehicle.
14. Verify the front end alignment. Refer to Wheel Alignment Measurement See: Alignment/Service and Repair/Wheel Alignment Measurement.
