Yukon Denali 4WD V8-6.0L Hybrid (2011)
1. Place the new small seal clamp (2) onto the small end of the joint seal (1). Compress the joint seal (1) and small seal clamp (2) onto the halfshaft
bar.
2. Position the small end of the joint seal (1) into the joint seal groove (3) on the halfshaft bar.
Caution: Refer to Fastener Caution See: Service Precautions/Vehicle Damage Warnings/Fastener Caution.
3. Secure the small seal clamp (1) with J-35910 - pliers , or equivalent, a breaker bar, and a torque wrench and tighten to 136 Nm (100 lb ft).
