Yukon Denali AWD V8-6.2L (2007)
Check the alignment of the striker. The striker should be centered in the primary latch as shown in the illustration above.
If the striker is out of alignment, loosen the three retaining bolts and adjust until the striker is centered.
Tip
You may wish to mark the latch position BEFORE adjusting to assist you in maintaining the original vertical alignment of the latch.
Secure the three latch retaining bolts.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
Confirm proper operation and effort to close the hood.
Warranty Information
Foe vehicles repaired under warranty, use the table.
Disclaimer
