Yukon Denali AWD V8-6.2L (2007)
Attach all connectors except the 16-way gray connector.
Attach the repair harness to the flexible fish tool (tool E) and route the repair harness through the console.
Do not apply tape directly to the terminals.
Tape repair harness to flexible fish tool (tool E) at the feed-through end (1) of the tool.
For vehicles equipped with the UVB radio system, tape the harness end with five 0.64 female terminals to the feed-through end of the flexible fish tool
(tool E).
For vehicles equipped with the UVA radio system, tape the harness end with the gray 16-way connector.
Feed the repair harness through the lower left-hand front side of the console.
Pull the repair harness (1) out from the lower left-hand rear side of the console.
Connect the 8-way audio/video jack connector if the vehicle is equipped with the UVA radio system. The UVB harness will not have the 8-way
connector.
