gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Brakes - Rotor/Drum Refinishing Labor Operations|Page 14258 > < Procedures|Page 14252
Page 1
background image

Brake Drum: Technical Service Bulletins
Brakes - Rotor/Drum Refinishing Labor Operations

Bulletin No.: 06-05-22-007

Date: November 30, 2006

WARRANTY ADMINISTRATION

Subject:
Brake Rotor/Drum Refinishing Labor Operations

Models:
2005-2007 GM Passenger Cars and Light Duty Trucks (including Saturn)
2005-2007 HUMMER H2
2006-2007 HUMMER H3
2005-2007 Saab 9-7X (Canada Only)

The purpose of this bulletin is to advise dealership personnel of labor operation changes relating to brake repairs. Existing brake rotor and drum labor
operations have been revised to remove the refinishing times and new labor operations have been established for refinishing brake rotors or drums. The
changes will become effective with the release of the December 2006 Labor Time Guide.

The following changes:

Applies to all 2005-2007 vehicles, unless 2005 was the last year of production for that particular model. May apply to 2004 and prior models years if the
vehicle was produced after 2005 - e.g. TrailBlazer, Envoy, etc.

Where the new labor operations for refinishing rotors or drums do not apply, the existing labor operations will still contain time for refinishing.

Always refer to the Labor Time Guide for the appropriate labor operations and time for the vehicle being repaired.

Brakes - Rotor/Drum Refinishing Labor Operations|Page 14258 > < Procedures|Page 14252