Yukon Denali AWD V8-6.2L (2007)
4. Install the coolant air bleed covers (313) and seals (308), if required.
5. Install the coolant air bleed cover bolts (312), if required.
Tighten the bolts to 12 N.m (106 lb in).
6. Install the radiator vent inlet hose (2) to the coolant air bleed pipe fitting.
7. Position the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
8. Install the air cleaner outlet duct.
9. Fill the cooling system. Refer to Draining and Filling Cooling System (Vac-N-Fill).
10. If the rear coolant air bleed covers were replaced, install the intake manifold.
