Yukon Denali AWD V8-6.2L (2007)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Replacement (RPO L92 - Second Design)
Valve Lifter Replacement (RPO L92 - Second Design)
Removal Procedure
1. Remove the cylinder head and gasket.
2. Remove the valve lifter guide bolts (211).
3. Remove the valve lifter guides (210) with the lifters. Note the installed position of the guides. The notched area of the guides is to align with the
locating tab on the engine block.
4. Remove the valve lifters (209) from the guide (210).
5. Organize or mark the components so that they can be installed in the same location from which they were removed, if required.
6. Clean and inspect the valve lifters, if required.
Installation Procedure
Important: When reusing valve lifters, install the lifters to their original locations.
