Yukon Denali AWD V8-6.2L (2007)
Tighten the bolt to 25 N.m (18 lb ft).
2. If equipped with a RPO L76 (6.0L) engine, perform the following.
1. Install the oil cooler hose assembly and a NEW gasket.
2. Install the oil cooler hose adapter bolts (2).
Tighten the bolts to 12 N.m (106 lb in).
3. Install the oil cooler hose bracket bolt (1).
Tighten the bolt to 25 N.m (18 lb ft).
3. For 2500 series vehicles, raise the differential carrier into position.
4. Install the differential carrier left side upper bolt and nut until snug.
5. Install the differential carrier left side lower bolt and nut until snug.
6. Install the differential carrier right side nuts.
